|
![]() |
The following is a summary of the changes to Canadian Amateur Certification Band Privileges as announced in Gazette Notice DGB-00305 dated July 22, 2005.
In the chart below *
indicates a change from the old state.
B/H = new “Basic with honors” certification level, B = Basic, A= Advanced, 5 = 5 WPM Morse.
|
Existing Certificate Holders on July 22, 2005 |
Band Privileges |
|
Basic + 5 WPM Morse Code (B&5) |
All Bands |
| Basic + Advanced (B&A) * |
All Bands |
|
Basic + Advanced + 5 WPM Morse Code
(B&A&5) |
All Bands |
|
Basic certified before April 2, 2002 (B/H) * |
All Bands |
|
Basic certified after April 1, 2002 with 80% or
more (B/H) * |
All Bands |
|
Basic certified after April 1, 2002 with 60-79% (B) |
Above 30 MHz only |
|
Upgrade or New Certificate after July 22, 2005 |
Band Privileges |
| Basic passing 5
WPM Morse Code (B&5) |
All Bands |
| Basic passing
Basic again with 80% or above (B/H) * |
All Bands |
| Basic passing
Advanced with 70% or more (B&A) * |
All Bands |
| New Ham passing
Basic with 80% or above (B/H) * |
All Bands |
| New Ham passing
Basic with 70-79% (B) |
Above 30 MHz
only |
See
Industry Canada Spectrum Management and Telecommunications
Gazette Notice DGRB-003-05 and
the associated revised RIC-2 and RIC-3
for complete details.
The
Basic certificate has the
privileges of power to 250 DC input and to build equipment excluding
homebrew transmitters.
The
Advanced certificate has the
additional privileges of: power to 1000W DC input, build homebrew
transmitting equipment, establish repeaters and club stations and
remotely control fixed stations.
The
5 WPM Morse
certification is still available for those who wish to demonstrate and
use the skill or to operate in another country that requires it. RAC
also issues Certificates of Proficiency in Morse Code at speeds of 12,
15, 20, 25, 30, 35, and 40 WPM.
The following clarifications were obtained from the Amateur Radio Service Centre Aug 11, 2005 and Oct 28, 2005:
1) If you wrote the BASIC test
between April 1, 2002 and July 22, 2005 and scored 80% or more, you
should contact the accredited examiner who conducted your exam and
ensure that they fax or mail a copy of your Basic exam results and
IC2381BD application form to Industry Canada. The database will be
updated to show a "+" sign next to BASIC, which signifies a "BASIC with
honors" status.
3)
Your
“Certified Date” is the date that you were entered
into the Industry Canada Database, which will be a little later than
you wrote the test and a little earlier than the date that the
certificate was printed (which is what is shown on the certificate). If
in doubt, the only way to find out your actual certified date is to
phone the Amateur Radio Service Centre at 1-888-780-3333.